4
Safety precautions
• When using the product, also read the user manuals supplied with the devices that are to be connected.
• When not using the product, remove the power plug from the power outlet.
• Turn the product off before connecting or disconnecting cables.
• If you use the product near a TV or radio antenna, noise may be generated in the TV or radio. In this case, move the product away from the TV or
radio antenna.
• Two transmitters on the same frequency cannot be used simultaneously.
• Please be aware that interference may be generated from the surrounding electromagnetic environment and/or from using multiple units.
• The wireless system may be affected by electromagnetic noise from automobile spark plugs, light dimmers, computers, OA devices, or electrical
music instruments. Position the components of the system in a place where it is less likely to be affected.
• Only use this product in combination with devices specified by the manufacturer.
• Insert the plugs of connecting cables securely into their mating connectors.
• Radio waves in the UHF band propagate mainly by line of sight. Configure system so there are no obstructions between
the transmitter and receiver.
• Turn the phantom power off when connecting to the mixer.
• Use 120 V AC power source. Refer to "Specifications" for product ratings.
• If there is an electronic device or a transmitter (mobile phone etc.) in the vicinity of this product, this product may be subject to noise. In this case,
move the product away from the devices.
• When installing this product, make sure there are no obstacles between the receiver and the transmitter that block radio waves.
• If you use the product near a TV or radio antenna, noise may be generated in the TV or radio. In this case, move the product away from the devices.
• To prevent the batteries from wearing out, turn the product off when not in use.
• Over time, discoloration may occur due to ultraviolet rays (especially direct sunlight) and friction.
• Any customization of the product is prohibited by law. Also, disassembly of the product may result in electrical shock, equipment damage or fire.
Never disassemble the product.
Care
• If the product becomes dirty or dusty, disconnect the power plug first, and then wipe the product off with a dry soft cloth.
• Do not use benzine, thinner, contact restoring protective agent, or any other chemical agent. Doing so may cause deformation, damage, or
malfunction.
• When storing the product for an extended period of time, wrap it with a plastic cover, and do not allow it to be exposed to humidity.
