Audio Physic TEMPO plus Скачать руководство пользователя страница 17

TEMPO plus

 

 

English

Setting Up the Loudspeakers

1. 

The ideal placement of your loudspeakers in your room involves positioning them in an  

 

isosceles triangle arrangement including your listening seat, creating equal spacing between 

 

each loudspeaker and the listening position.

2. 

The distance between the loudspeakers should be around 0.8 - 1.2 times as much as the  

 

distance between the loudspeakers and the listening position. The closer you sit to the  

 

loudspeakers, the more direct and dry your sound experience will be. As you move further 

 

away from the loudspeakers, the bass response will normally increase and the spatial imaging 

 

will seem more generous.

3. 

Where possible, the loudspeakers should be positioned half a metre away from the  

 

surrounding walls. The larger the space between the loudspeakers and back wall,  

 

 

 

 

 

 

 

the more precise the sound reproduction,  

 

 

 

 

 

 

 

particularly where bass frequencies are  

 

 

 

 

 

 

 

concerned.

4. 

The closer the loudspeakers come to the back wall (and/or side wall), the more powerful the 

 

broadband reproduction of the low frequencies will be – resulting in stronger bass tones.  

 

 

 

 

 

 

 

This bass boost can, however, also result in a 

 

 

 

 

 

 

 

sound reproduction that is undifferentiated and 

 

 

 

 

 

 

 

lacking in detail, depending on how close the 

 

 

 

 

 

 

 

loudspeakers are to the walls.

5. 

This effect can be made even more intense when the loudspeakers are placed in a corner. Low 

 

tones become around 6 decibels (or more) louder and have a major effect on the sound 

 

 

 

 

 

 

 

reproduction. Where possible, you should not 

 

 

 

 

 

 

 

place your new loudspeakers in a corner 

 

 

 

 

 

 

 

because the acoustic conditions in this position  

 

 

 

 

 

 

 

do not allow them to display their full range of 

 

 

 

 

 

 

 

sound reproduction possibilities, instead they 

 

 

 

 

 

 

 

will stay far below their actual sound potential.

Setup away from the wall: The loudspeakers 

are positioned at least 50 centimetres away 

from the surrounding walls. This provides a 

clearly defined bass response and a clean, 

crisp reproduction of midrange frequencies.

> 50 cm

> 50 cm

Setup close to the wall: Low frequencies are 

broadly reinforced by 3 and +6  

decibels when the loudspeakers are positioned 

in close proximity to the wall, the result being 

a more full-bodied sound and possibly a more 

contoured performance in the midrange. 

Bass boost of +3 to +6 dB

Bass boost of > 6 dB

Setup in the corners of the room: Low tones 

become significantly louder and overlap into 

the midrange frequencies. This results in a 

washed-out and lethargic sound reproduction.

17

Содержание TEMPO plus





















Отзывы: