8.
Place the plastic washers included in the delivery onto the bore holes of the stands from
above and insert the provided flange bolts into the holes. Tighten the flange bolts firmly.
The bolts need about nine turns to lock unto the stands and about four more turns to
ensure optimum grip.
9.
Now turn over the loudspeakers so that the metal feet are in stable contact with the floor.
Two people should also carry out this step where possible. Make sure that you do not hurt
yourself on the tips of the spikes.
10.
Place the loudspeakers in their intended positions and finely adjust the spikes so
that the loudspeakers do not wobble. If you do not place the loudspeakers in a
secure and stable position and they therefore wobble, this will have a major effect
on the sound. When the boxes are standing level and upright, you have set them up
perfectly. The enclosed spirit level will help you to finely adjust the loudspeakers
(they are level when the bubble remains in the inner circle). Use the lock nuts to
again tighten the spikes. Roughly hand-tightening the nuts is sufficient.
11.
Attach the foot end caps to the knurled screw of the feet. Simply lift up the foot end caps to
remove them.
You can now start to optimally align your new TEMPO plus to the listening position. You can find
tips regarding this process in the following chapter on “Setup” and can access particularly detailed
information on the AUDIO PHYSIC website.
AUDIO PHYSIC`s Sound Advice
If you want to increase the sound quality even more in terms of precision and bass
response, try out our high-quality VC feet (for example VCF II M 8 in the image
on the right) on your loudspeakers. The “Vibration Control“ feet are not only an
alternative to spikes for high-quality flooring, but also reduce the transmission of
vibrations between the loudspeakers and the floor. This results in an audible
improvement to the level of detail and realistic sound reproduction. For more
information and advice, please contact your dealer.
TEMPO plus
English
15
