Audio International, Inc.
DVD-024-04-x Installation
Document #540184, Rev. IR, 3/2000
Page 11 of 15
3.5
Physical Characteristics
3.5.1 The DVD-024-04-x should be located away from excessive heat,
excessive moisture, splashing liquids, direct sunlight, and areas
with excessive dust.
3.5.2 Allow at least 1-inch air space around the unit for heat dissipation.
Make sure there are no paper, plastic, or other flammable materials
in contact with the case.
3.5.3 Refer to Section 6.0 for unit dimensions and mounting hole sizes.
3.6
Electrical Characteristics
3.6.1 The DVD utilizes one 15-pin connector for electrical connections.
This connector pr28 VDC, data bus control, and infrared
input. Refer to Section 3.7 for mating connector information.
3.6.2 P2, located on the rear of the unit, provides digital audio output.
The connector mates with a ST fiber optic cable.
3.6.3 The video output connector (BNC1) allows for proper video output
to the video distribution system.
3.6 Connector / Mating Connector Information
Model #
Connector
Mating Connector
DVD-024-04-1
RD15M10JV30
RD15F10JVL0
DVD-024-04-2
DAMA-15P
DAMA-15S
D20418-2 Female Screwlock
P2 Digital Video Output
ST Series Fiberoptic
Cable
BNC1 Video Output
AMPHENOL 31-
71013 or equivalent
