20
Rev.1.25
Connecting an external device
You can connect an external device (for example, a portable CD player) to the external input
terminal and transmit the audio to the receiver.
1) Turn off the power of the microphone and the external device.
2) Connect an external device.
Use a ø3.5 stereo mini-plug to connect the external device (for example, a portable CD player) to the
external input terminal.
3) Turn on the power of the external device (for example, a portable CD player).
4) Turn on the power of the microphone.
5) Adjust the volume.
Adjust the audio volume of the external device.
Note:
• Once a ø3.5mm stereo mini-plug is plugged into the external input terminal, priority is given to this
input and the audio from the microphone opening and the microphone input terminal will not be
transmitted.
• If an external microphone is mistakenly connected to the external input terminal, the audio
of the external microphone will not be transmitted. Turn off the power of the microphone, disconnect
the plug, and connect the external microphone to microphone input terminal.
• If the audio of the external device is stereo, stereo signals will be mixed.
• When fine-tuning the volume of an external device using this microphone, select [OWN] by
pressing the selector button. For fine tuning, refer to "Adjusting the volume" section.
• In addition to this manual, refer to the operating instructions of the device to be connected.
External input terminal
1,4
[PWR/MUTE] button
2
