20 Audio Authority AVAtrix User Manual
Audio Authority AVAtrix User Manual 21
Numeric keys 1-6 used for instant
source input selection and navigation
ZONE key used to select a single Wallplate
GROUP key use to select a group of Wallplates
MENU key used to access AVX-562 setup menu
SCAN keys used to browse
AVAtrix inputs or navigation
DIM/SCROLL (up/down) used to dim AVX-
562 panel display and for navigation
ALL key used to select all Wallplates
SOURCE key used to select source
input to Wallplates (Double click for
main output control in Pro Mode)
LOCK key used in conjunction with VIEW-
LOCK, IR-LOCK, and UNLOCK keys
ENTER key used to make menu selections
DISPLAY key used to switch between Resi-
dential and Professional panel display mode
800-322-8346
www.audioauthority.com
MENU
LOCK
ZONE
SOURCE
GROUP
ALL
A
D
G
J
B
E
H
K
C
F
I
L
SCAN
DIM / SCROLL
ENTER
DISPLAY
Model 1105BK IR Remote
UNLOCK key used to cancel all temporary
restrictions
VIEW-LOCK key used for private viewing restriction
IR-LOCK key used for source control restriction
Use the 1105BK remote to operate the AVAtrix from the
head end or from a properly equipped Cat 5 receiver
zone. Setup functions are only available at the head
end. The 1105 IR command set can be used in a 3rd
party universal remote control system; download the
ccf file from www.audioauthority.com/page/software.
Model 1105BK Remote Control
AVAtrix Front Panel Controls
(From Professional Screen)
Changing the source on the
local (MAIN) output
Touch soft key until MAIN is highlighted; touch the desired source input selection key or
turn the knob.
Changing the source on a
ZONE (Cat 5 receiver)
Turn the knob to navigate, press the knob to change directions; when the desired zone
is highlighted, touch the desired source input selection key.
Changing the source for a
group of zones
Touch soft key until GRP is highlighted; turn the knob to select the desired group; touch
a source input selection key to assign a source.
Changing the source for all
zones
Touch soft key until ALL is highlighted; touch the desired source input selection key to
assign a source. (Press the knob to UNDO.)
Remote Zone Operation: Key Sequence Examples
The key sequences for several operations using the 1105BK IR remote control from the Cat 5 wallplate/
receiver zone are shown below. The zone must be equipped with a compatible IR receiver.
View-lock and IR-lock timeout after 300 minutes. These commands can be temporarily suspended using the
Source and Control Restrictions Diagnostic Mode.
Changing the source on the
zone output
Press the desired source number key.
Activate VIEW LOCK
(private viewing)
Press LOCK, then press VIEW LOCK. No other zones can select the source selected
at this zone, and zones viewing this source are locked out. (Expires after 300 minutes.)
Activate IR LOCK
Press LOCK, then press IR LOCK. No other zones can change settings (channels, etc)
through the AVAtrix IR pathway. (Expires after 300 minutes.)
Clear all LOCK commands
Press LOCK, then UNLOCK.
