4. Then press the “▲” or “▼” button to increase or decrease the frequency
by the step of 250 KHz. When the “▲” or “▼” button is pressed
continuously, the frequency will be increased or decreased in a fast
manner until the button is released. When the upper limit or the lower
limit of the frequency is reached, the frequency will go back to the lower
limit or higher limit and continue increasing or decreasing.
5. Once the desired frequency is reached, press the “SET” button to save
and exit to the main menu. If the frequency number blinks 5 times,
without pressing the “SET” button, the AWR6952U will exit to the main
menu without saving the selected frequency.
6. The “CHANNEL Display” will display a capital letter “U”, instead of the
number (from 0 to 99), if the frequency is tuned to a frequency between
two channel numbers.
7. Once the fine-tuned frequency is selected, the AWR6952U will keep the
selected frequency until the frequency is changed later.
SYNCHRONOUS FREQUENCY MATCHING
1. The “Sync” icon is used to have the frequency of the AWX6952U
transmitter be set to the same frequency as that of the AWR6952U
receiver through the infrared windows.
2. In the main menu, press the “▲” or “▼” button to the “Sync” icon.
3. After the “Sync” icon is displayed, press the “SET” button and “NO” will
be displayed.
4. Then press the “▲” or “▼” button to toggle the display between “YES” or
“NO”.
5. If it is desired to have the frequency of the AWX6952U transmitter be set
to the same as that of the AWR6952U receiver, press the “▲” or “▼”
button to have the “YES” display.
6. When “YES” is displayed, press the “SET” button to prepare to set the
transmitter frequency as follows:
-
16
-
