FREQUENCY SCAN
1. The “Search” icon is used to automatically scan the surrounding area to
select clear frequencies.
2. In the main menu, press the “▲” or “▼” button to the “Auto Search” icon.
3. When the “Search” icon is displayed, press the “SET” button. After the
“SET” button is pressed, the display “NO” will start to blink.
4. Press the “▲” or “▼” button to toggle the display between “YES” and
“NO”.
5. Then, press the “▲” or “▼” button to have the display “YES” and press
the “SET” button to start the frequency scan. The display will sweep
through all one hundred channels (from “CH 00” to “CH 99”) twice
automatically. At the end of the automatic sweeps, the channel number
will go to the channel which is the clear frequency in this surrounding
area and the AWR6952U will exit to the main menu.
NOTE
: If the display shows “NO” and the “SET” button is pressed, the
AWR6952U will exit to the main menu.
FREQUENCY TUNING
1. The “Tune” icon is used to manually fine tune the AWR6952U
frequencies. There are six hundred (600) frequencies to be fine tuned to.
2. In the main menu, press the “▲” or “▼” button to the “Tune” icon.
3. With the “Tune” icon displayed, press the “SET” button to display the
current frequency setting.
-
15
-
