Dante-MY16-AUD User Guide Version 1.41
Page 45 of 46
How to configure Dante clocking
Automatically
The easiest way to configure clocking on your Dante network is to let the Dante network provide the clock for all
the audio equipment, and to allow the Dante devices to automatically elect a PTP Clock Master.
All Dante devices including Dante-MY16-AUD cards should be in their default state (“Preferred Master” and “Slave
to External Word Clock” UN-checked), and host equipment configured to derive its word clock from the Dante
device or a Dante-MY16-AUD card.
Choose an external clock for the Dante network to use
Sometimes you may need to tell the Dante network to use an external word clock. In this case, you must select
ONE
Dante device, for example
ONE
Dante-MY16-AUD card, to derive its clock from this external source.
In the example below, the word clock for the system will come from a Yamaha mixing desk.
ONE
of the Dante-
MY16-AUD cards in that mixing desk has its word clock source set to “external” and is deriving its clock from the
input Yamaha clock signal. Any Dante device with this setti ng will immediately become the Dante PTP Clock
Master, and all other Dante-enabled devices and cards will lock to its clock.
Manually choose a Dante PTP Master Clock
This is a more advanced feature, and should not be employed unless you have a more complex network and a
clear plan for the clock configuration and settings of your network.
Содержание Dante-MY16-AUD
Страница 1: ...User Guide Dante MY16 AUD ...
Страница 11: ...Dante MY16 AUD User Guide Version 1 41 Page 11 of 46 ...
