Dante-MY16-AUD User Guide Version 1.41
Page 28 of 46
Dante-MY16-AUD Basic Operation
Once you have installed Dante-MY16-AUD cards in your Yamaha equipment and connected them to a network you
are in a position to start using Dante networking in earnest to set up audio routes between devices, including other
Dante-enabled devices you may have on the network and any PCs or Macs running Dante Virtual Soundcard.
Pre-operation checklist
To start configuring and using your Dante-MY16-AUD card and Audinate software you should have completed the
following:
Installed your Dante-MY16-AUD card in your Yamaha equipment
Registered your Dante-MY16-AUD with www.audinate.com and redeemed your DVS Token for a
Dante Virtual Soundcard License ID
Downloaded and installed your Audinate software
Set up a network between your PC or Mac and your Dante-MY16-AUD card(s)
Referred to the Dante Controller and Dante Virtual Soundcard User Guides
Using Dante Controller
When you open Dante Controller it displays a grid view, which shows all the Dante-enabled devices on the
network. Initially it will display devices, but not channels wi thin devices. Devices with transmitter (Tx) channels will
be displayed along the top row and devices with receiver (Rx) channels will be displayed in the left hand column
Channels can be viewed by clicking on the + symbol next to Dante Transmitters or Dante Receivers, or the +
symbol next to a particular Dante device.
The Dante Controller User Guide contains detailed information about all aspects of using Dante
Controller. This section is only a brief overview – you will need to refer to the User Guide to be
able to use all features of Dante Controller.
Содержание Dante-MY16-AUD
Страница 1: ...User Guide Dante MY16 AUD ...
Страница 11: ...Dante MY16 AUD User Guide Version 1 41 Page 11 of 46 ...