Audica CS-SERIES, Руководство пользователя и технические характеристики

Страница: 6 / 13

6
GB
Speaker Connection
Follow the steps below to setup and connect your speakers to your AV equipment. If you are in doubt about any aspect of
your other equipment then please refer to that manufacturers manual.
MODEL No. CS-S1
FREQUENCY
80Hz-23KHz
POWER HANDLING
60W-100W
IMPEDANCE
4 Ohms
MADE
IN P.R.C
DESIGNED
IN THE EU
T
O
SPEAKERS
T
O
SOURCE
MODEL No
CS-C1
FREQUENCY
80Hz-23KHz POWER HANDLING
60W-100W
IMPEDANCE
8 Ohms
+
DESIGNED
IN THE EU
MADE IN P.R.C
T
O
SPEAKERS
Satellites and Towers should be wired up as shown (below left). To prevent
speakers being wired out of phase, always use the printed strand (3) for the
positive red terminal (1) on both the speaker and the amplifier. If the satellite is
wall mounted or sat on a flat surface then thread the wires to the rear of the
speaker using the metal clip pin provided (2)
The should be wired up as shown (below).
To prevent speakers being wired out of phase, always use the
printed strand (3) for the positive red terminal (1) on both the
speaker and the amplifier. Dress the cables out of the rear of
the speaker through the aperture in the terminal panel.
Centre Speaker
1
2
3
1
3
Amplifier rear panel (actual panel may differ)
CS-System 1 - CS-LCR (FL,FR)
CS-System 2 - CS-S1 (FL,FR)
CS-S1 (SL,SR)
CS-System 3 - CS-T1 (FL,FR)
CS-S1 (FL,FR) CS-System 1 - CS-LCR (CEN)
CS-System 2 - CS-C1 (CEN)
CS-System 3 - CS-C1 (CEN)
T
O
SPEAKERS
T
O
SPEAKERS
T
O
SPEAKERS
T
O
SPEAKERS
+
T
O
SPEAKERS
FL FR SL SR CEN
+ + + +