Bluetooth Gaming Soundbar| Instruction manual
4
Operation
Power on/off
1. Remove the battery activation tab (19) from the base of the remote control.
2. Short press the Power
(6) On/Off button on the remote control or
long press
/M (5) on the soundbar to turn the unit on/off.
LED Indicators
The LED indicator display area is behind the mesh in the centre front of your
soundbar and indicates as follows:
• Red LED: Power connected
•
AUX
: Auxiliary input mode
•
bt
: Bluetooth mode
•
USB
: USB media mode
•
ALL
: USB repeat all tracks
•
ONE
: USB repeat the same track
The LED display will also indicate track numbers and then current track time
during USB drive playback.
LED light strip indications:
01: Blue LED (default), 02: Green LED, 03: Red LED,
04: White LED, 05: RGB LED flashes randomly.
AUX IN Mode
1. Connect a compatible audio device using the 3.5mm - 3.5mm stereo jack
cable supplied connected to the AUX IN port (17) on the back of the soundbar.
2. Press the
MODE button on the remote control (15) or short press the /M
(5)
on the soundbar control panel repeatedly until
AUX is displayed on the LED
display
and you will hear a spoken “AUX mode” message.
3. Ensure the connected device is producing an audio signal, then adjust the
volume using the
and
buttons on the remote control (9 & 10) or
/
(2 & 1) on the soundbar control panel. Use the controls on the AUX IN
device for all other functions.
Bluetooth Mode
1. Press the MODE button on the remote control (15) or soundbar control panel
(5) repeatedly until
bt is shown on the LED display. The LED display will flash
to indicate that the soundbar is in Bluetooth pairing mode and you will hear a
spoken “Bluetooth mode” message.
2. Enter your device’s Bluetooth menu and select “AF-20” in the device list.
When your AF-20 and device are paired, the LED display on the soundbar will
stop flashing and remain constant.
(The soundbar will now automatically reconnect with this device whenever it is
within range and has Bluetooth turned on.) Once paired, the remote control or
soundbar control panel can be used to play, pause (
)
and navigate between
tracks (
/
)
on compatible iOS and Android devices.