background image

THUNDER 

350 RGB

USER´S

MANUAL

12

1

Safety instruction

Please read the instruction carefully which includes important information 

about the installation, usage and maintenance.

Please keep this User Manual for future consultation. If you sell the unit to 

another user, be sure that they also receive this instruction booklet.

1.Unpack and check carefully there is no transportation damage before 

using the unit.

2.Before operating, ensure that the voltage and frequency of power supply 

match the power requirements of the unit.

3.It’s important to ground the yellow/green conductor to earth in order to 

avoid electric shock.

4.The unit is for indoor use only. Use only in a dry location.

5.The unit must be installed in a location with adequate ventilation, at least 

50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

6.Disconnect main power before replacement or servicing.

7.Make sure there are no flammable materials close to the unit while 

operating as it is fire hazard.

8.Use safety cables when fixing this unit. DO NOT handle the unit by its head 

only, always carry by its base.

9.Maximum ambient temperature is Ta: 40 degrees C. DO NOT operate it 

where the temperature is higher than this.

10.Unit surface temperature may reach up to 75 degrees C. DO NOT touch 

the housing with bare

hands during its operation. Turn off the power and 

allow about 15 minutes for the unit to cool down before replacing or serving.

11.In the event of a serious operating problem, stop using the unit immedia-

tely. Never try to repair the unit by yourself. Repairs carried out by unskilled 

people can lead to damage or malfunction.

Warning!

Warning!

Warning!

28 

000-255 

Red 0-100% 

LED Group 10 

29 

000-255 

Green 0-100% 

30 

000-255 

Blue 0-100% 

31 

000-255 

Red 0-100% 

LED Group 11 

32 

000-255 

Green 0-100% 

33 

000-255 

Blue 0-100% 

34 

000-255 

Red 0-100% 

LED Group 12 

35 

000-255 

Green 0-100% 

36 

000-255 

Blue 0-100% 

37 

000-255 

Red 0-100% 

LED Group 13 

38 

000-255 

Green 0-100% 

39 

000-255 

Blue 0-100% 

40 

000-255 

Red 0-100% 

LED Group 14 

41 

000-255 

Green 0-100% 

42 

000-255 

Blue 0-100% 

43 

000-255 

Red 0-100% 

LED Group 15 

44 

000-255 

Green 0-100% 

45 

000-255 

Blue 0-100% 

46 

000-255 

Red 0-100% 

LED Group 16 

47 

000-255 

Green 0-100% 

48 

000-255 

Blue 0-100% 

49 

000-255 

Red 0-100% 

LED Group 17 

50 

000-255 

Green 0-100% 

51 

000-255 

Blue 0-100% 

52 

000-255 

Red 0-100% 

LED Group 18 

53 

000-255 

Green 0-100% 

54 

000-255 

Blue 0-100% 

Содержание THUNDER 350 RGB

















Отзывы: