USER´S
MANUAL
Aurora
150T
1
10
Table of Contents
Caution!........................................................................................................................2
Introduction..................................................................................................................2
Safety instructions.........................................................................................................2
Installation.....................................................................................................................3
Read ‘Safety information’ before installing the fixture..............................................3
Fastening the fixture to a flat surface..........................................................................3
Mounting the fixture on a truss.....................................................................................3
Securing with a safety cable........................................................................................4
DMX-512 connection/connection between fixtures.................................................4
Power connection.........................................................................................................4
Operation......................................................................................................................5
Control Menu Map........................................................................................................5
Control menu.................................................................................................................6
Main Menu.....................................................................................................................6
Addressing.....................................................................................................................7
Universal DMX Control...................................................................................................7
RDM control...................................................................................................................7
Rotary Knob function....................................................................................................8
Set dimmer curves.........................................................................................................8
DMX Protocol................................................................................................................9
Fixture Cleaning...........................................................................................................9
Troubleshooting..........................................................................................................10
The fixture does not work, no light..............................................................................10
Technical specifications............................................................................................10
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of the fixture with
low-pressure compressed air.
3. Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a
weak deter- gent solution. Do not rub glass surfaces hard: lift particles off with a soft
repeated press. Dry with a soft, clean, lint-free cloth or low-pressure compressed air. Remove
stuck particles with an unscented tissue or cotton swab moistened with glass cleaner or
distilled water.
4. Check that the fixture is dry before reapplying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.
The fixture does not work, no light
• Check the connection of power and main fuse. Be sure the external fuse has not blown.
• Measure the mains voltage on the main connector.
Technical specifications
Please note: All information is subject to change without prior notice. 30.06.2021
Model
Aurora 150T
Power supply:
AC100-240V, 50/60Hz
Light source:
720 x 2 SMD LED
Power consumption:
150Watt max.
Color temperature:
3200K - 5600K tunable
Color Rendition:
CRI 95, TLCI 98
Power connection:
PowerCON in & out
Signal connection:
3-pin XLR in & out
DMX channels:
2, 5 CH
Control mode:
DMX, RDM, Rotary
Housing:
Colour black, aluminum
Size:
398 x 150 x 299 mm
N.W.(barndoor incl.):
5.5 kg
Accessories(included):
Power lead, Safety rope, Barndoor
Enviroment:
IP20
