Audi TT 2015, Руководство пользователя, Страница: 74 / 300

Driving
((!)
Note
-The indicator lamp
rl]
in the switch and the
warning lamp
.
on the instrument cluster
display will go out after a while if the park­
ing brake is applied with the ignition switch­
ed off.
-The parking brake is applied automatically if
the driver's door is opened while the igni­
tion is on. This is to prevent the vehicle from
accidentally rolling away.
-Any slight noise which may be heard when
the parking brake is applied or released is
quite normal and no cause for concern.
- The parking brake runs an automatic test
cycle at regular intervals when the vehicle is
parked. This may cause a slight noise, which
is normal.
- If the warning lamp
.
appears, there may
be a parking brake malfunction
qpage 11.
-If the electrical power supply fails, it is not
possible to release the parking brake (if it
was applied) or to apply the parking brake
(if it was released) q .&. . Obtain professional
assistance.
Parking the car
.., Press the brake pedal to bring the vehicle to a
stop.
.., To apply the parking brake, pull the switch�­
.., Vehicles with automatic gearbox: Move the se-
lector lever to position P.
.., Switch off the engine
q
A .
.., Manual gearbox: Engage first gear.
.., When parking on a hill or gradient, turn the
steering wheel so that the vehicle would roll in­
to the kerb if it did start to move accidentally.
A
WARNING
- Always take the key with you when leaving
your vehicle - even if you only intend to be
gone for a short time. This is especially im­
portant if children are left in the car. They
might otherwise be able to start the engine,
release the parking brake or use power-op­
erated equipment such as the electric win­
dows - this could lead to injuries.
72
- Do not leave anyone (especially children) in
the vehicle when it is locked. Locked doors
could delay assistance in an emergency, po­
tentially putting lives at risk.
Driving away from a standstill
The parking brake auto release function releases
the parking brake automatically when you wish
to start moving.
Applying the parking brake when stopping
.., To apply the parking brake, pull the switch�-
Releasing the parking brake when driving
away
Important: The driver's door must be closed and
the driver's seat belt must be buckled.
.., Press the accelerator in the normal way: the
parking brake will be released automatically
and the vehicle will start moving.
You can apply the parking brake when stopping
at traffic lights, etc. You do not then have to hold
the car with the brake pedal, as the parking brake
will stop it creeping forward while a gear is en­
gaged in the automatic transmission. When you
drive off in the normal way, the parking brake
will be released automatically and the vehicle will
start moving .
Driving away on a slope
When driving away on a gradient, the parking
brake auto release function prevents the vehicle
from rolling back unintentionally. The braking
force of the parking brake is only released when
there is enough power at the wheels to make the
vehicle move in the desired direction.
@
Note
For safety reasons the parking brake will only
release automatically if the driver's seat belt
is engaged in its buckle and the driver's door
is closed.