– Rotate the three tensioning levers clockwise through 10 to
12 turns -arrow a-.
– Exert pressure -arrow c- to close the tensioning lever.
Caution
If you do not exert sufficient pressure when closing the
tensioning lever, the bicycle rack will not be securely
seated and may work loose!
● If the tensioning lever in question cannot be closed, rotate it
anticlockwise through one turn -arrow b- and then exert
pressure to close it -arrow c-.
● If the tensioning lever in question can be closed without
exerting pressure, rotate it clockwise through one turn -arrow
a- and then exert pressure to close it -arrow c-.
– Use the key provided -4- to close the lock on the tensioning
lever with lock -9-.
Load — room to open boot lid
Caution
To prevent damage to the vehicle, make sure that you open
the boot lid carefully when installing the bicycle rack. For
vehicles featuring automatic boot lid operation, it is
recommended that you adjust the opening angle as
necessary
⇒
Vehicle Owner's Manual.
5.2
Removing the bicycle rack from the
roof bars
– The bicycle rack can be removed by following the above
steps in reverse order.
5.3
Installing the bicycle on the bicycle
rack
WARNING
Remove child seats and loose objects such as drinks
bottles and saddle bags before loading.
Do not cover bicycles with tarpaulins, protective covers or
any other cover.
Installation instructions - Bicycle rack
Edition 03.2011
10
5 Installing/removing the bicycle rack and bicycle
