Audi 4KE.071.151 Скачать руководство пользователя страница 4

2

Safety notes

2.1

General safety notes

WARNING

Please read these assembly instructions carefully before starting installation. Non-compliance
with these installation instructions and safety notes will compromise your safety and that of third
parties.

WARNING

The driver is responsible for making sure that his view and ability to hear are not impaired by his
load or by the condition of the vehicle.

He must make sure that the load does not prevent the vehicle from complying with country-spe-
cific regulations and that road safety is not compromised.

WARNING

All bolted connections and connections for the carrier units and for the roof rack modules must
be checked prior to travelling to make sure that they are correctly positioned and installed. Tight-
en if necessary.

Recheck bolted connections and connections at appropriate intervals and tighten if necessary.
The bolted connections and connections must be checked at short intervals if travelling on a
poor stretch of road.

If these guidelines are not observed, this can result in the carrier units or the roof rack modules
becoming loose or falling off – risk of accident!

WARNING

Repairs or the replacement of parts must only be performed by a qualified workshop. It is recom-
mended that genuine spare parts available from your Audi partner are used.

WARNING

The procedures and safety notes detailed in these instructions for the installation, handling and
use of the carrier units must always be observed.

Deviating from these instructions can cause the carrier units or the mounted roof rack module
to come loose.

The carrier units are designed such that the vehicle will not be damaged if components are in-
stalled, handled and used properly.

The manufacturer is not liable for any damage resulting from failure to comply with the installa-
tion procedure or notes specified.

All forms of warranty claim against the manufacturer are invalidated if installation, handling or
use of the components is not carried out as specified in these instructions.

WARNING

Replace damaged components immediately.

Do not use elasticated straps or bungee cords!

Installation instructions - Audi e-tron 2019 ►
Edition 01

2

2  Safety notes

Содержание 4KE.071.151

















Отзывы: