Audi 4KE.071.151, Руководство по установке

Страница: 14 / 16

4.4 Maintenance instructions
Carrier units
The carrier units must always be cleaned and kept in good order. It is particularly important to remove any
dirt and salt in the winter.
The carrier units can be cleaned using water.
WARNING
Do not use any lubricants on the bolted connections.
Failure to comply with these instructions may result in the carrier units becoming detached,
causing injury to you or others and/or damage to property.
Caution
Do not use a high-pressure cleaner to clean the kayak holders.
4.5 Technical notes
Technical data
Dead weight of carrier unit set: approx. 5 kg (11 lbs).
Roof load/load
To determine the roof load:
Weight of the carrier unit
+ weight of the roof rack module
+ weight of the load
= roof load
WARNING
Never exceed:
◆
The maximum permissible roof load (75 kg/165 lbs)
◆
the gross axle weight rating
◆
the gross vehicle weight rating for your vehicle
⇒
Vehicle Owner's Manual.
4.6 Adjusting the carrier unit width
Instructions for the qualified workshop if the position of the
support bracket for the relevant vehicle is not set correctly.
– Install the carrier unit on the vehicle
⇒
Page 7 and only tight-
en gently on the left-hand side.
Installation instructions - Audi e-tron 2019 ►
Edition 01
12 4 Installing/removing the carrier units