19
Fig 4. Power connection of the controller and smoker. The generator is connected to
the power strip by the power cord from Bradley (green arrows). The input of the controller
is connected to the female receptacle on the generator by the power jumper cord
provided by the Bradley (blue arrows). It is the cord that used to connect the generator to
smoker. The controller output is connected to the smoker by the power cord (red arrows).
Install the sensor. The sensor is plugged into the sensor port on the controller (yellow
arrows)(Fig 4). The tip of the sensor is dropped into the damper hole. It is held in place
by a piece of tape on the top of the smoker tower. (Fig 5)
