18
Appendix 2
Controlling the Temperature of Bradley Smoker
1) Connecting the controller
There are two ways to power up the controller and smoker.
a) Using two power cords and a power strip. This set up is good for the
“Original”,
Stainless Steel, and Digital Bradley Smoker.
Fig 3. Power connection of the controller and smoker. The input of the controller is
connected to the power strip by the 16 AWG power cord supplied (blue arrows). The
generator is connected to the power strip by the power cord from Bradley (green arrows).
The controller output is connected to the smoker by an 18 AWG computer power cord
(red arrows, not supplied). The sensor is connected to the sensor port on the controller
(yellow arrows).
b)
Using one power cord. This set up is good for the
“Original” and Stainless Steel
Bradley Smokers only.
