45
Saf
ety P
recautions
●
When suddenly brought into a warm place from a cold
place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge
port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when
used under conditions such as this, the humidity might
cause corrosion or a fault.
●
When wiping the display, wipe with a soft, dry cloth. Use of
a moistened cloth, glass cleaner or other similar liquid might
cause a fault.
●
When connecting/disconnecting the external device to/
from the external connection terminal or the earphone
microphone terminal, make sure that the connector or plug
of external device is straight with the external connection
terminal.
●
Note that applying unnecessary force with the external
connection terminal or the earphone microphone terminal
connected to the external device might cause damage.
●
Do not discard the product together with regular trash.
Please cooperate in the collection of the product when it is
no longer needed to protect the environment and effectively
use resources. Old product is collected at au shops and
other places.
●
Insert only a microSD memory card into the memory card
slot on the product.
●
Do not exert excessive force when attaching/removing a
microSD memory card. Doing so might injure your hands or
fingers.
●
While writing/reading data to/from a microSD memory card,
do not subject the product to vibration or impact, or turn off
the power. Doing so might cause loss of data or a fault.
●
Take care not to cover the microphone with your fingers
during a call. The other party may not be able to hear your
voice clearly.
●
When using handsfree call, note that the speaker may
emit loud sound. Take care to keep the speaker at a safe
distance from your ears.
●
Do not cover the sensor with your finger or put a sticker on
it. Doing so may hinder the sensor for detecting the ambient
light level and functioning correctly.
●
Do not put a sticker, etc. on the proximity sensor. Doing so
may cause the sensor to malfunction and make the display
always turned off while receiving a call or during a call.
■
Touch panel
●
Use your finger to operate the touch panel. Do not use
ballpoint pens, pencils or other sharp-pointed objects.
Using such objects does not only hinder correct operation
of the touch panel, but also might cause scratching or
damage to the display.
●
Do not put stickers or sheets (e.g. commercially available
protective films, peep prevention sheets) on the display.
Doing so might hinder correct operation of the touch panel.
●
Do not operate the touch panel with fingernails. Doing so
might result in split nails or jammed fingers.
