ATX VC19E Скачать руководство пользователя страница 45

Страница: 45 / 52

3 - 17

BIOS Setup

Video Off In Suspend

The option allows you to select VGA status when the system goes to

suspend mode. The options are: No, Yes.

Video Off Method

The option

Blank Screen

allows the BIOS to blank off screen display by

turning off the red-green-blue signals. The option

V/H SYNC+Blank

al-

lows the BIOS to blank off screen display by turning off the V-Sync and H-

Sync signals sent from add-on VGA card. The option

DPMS

allows the

BIOS to blank off screen display by your add-on VGA card which sup-

ports DPMS (Display Power Management Signaling function).

The options are: Blank Screen, V/H SYNC+Blank, DPMS.

Suspend Type

The option allows you to select the suspend type that supported by the

chipset. The options are: Stop Grant, PwrOn Suspend.

Soft-Off by PWR-BTTN

The selection Delay 4 Sec. will allow the system shut down after 4 seconds

after the power button is pressed. The selection Instant-Off will allow the

system shut down immediately once the power button is pressed.

The settings are: Instant-Off, Delay 4 Sec.

Suspend Mode

When disabled, the system will not enter Suspend mode. The specified

time option defines the idle time the system takes before it enters Suspend

mode. The options are: Disable, 1, 2, 4, 8, 10, 20, 30, 40 Min, 1 Hour.

MODEM Use IRQ

This feature allows you to select the IRQ# to meet your modem IRQ#.

The options are: NA, 3, 4, 5, 7, 9, 10, 11.

HDD Power Down

The option lets the BIOS turn the HDD motor off when system is in Sus-

pend mode. Selecting 1 Min..15 Min allows you define the HDD idle time

before the HDD enters the Power Saving Mode.

The options 1 Min..15 Min will not work concurrently. When HDD is in the

Power Saving Mode, any access to the HDD will wake the HDD up.

The options are: Disabled, 1 Min..15 Min.

Содержание VC19E





















































Результаты поиска

Содержание VC19E

Отзывы:

Бренды по названию

Популярные бренды

ATX VC19E, Руководство пользователя

Результаты поиска

Содержание VC19E

Отзывы:

Бренды по названию

Популярные бренды