ATX IP2Agen2 Скачать руководство пользователя

Страница: 13 / 70

CHAPTER 3: INSTALLATION

MDU Solutions

– UCrypt

IP to Analog 2

Generation – Installation & Operation Manual

3-3

3.5 General Electrical

•

Consideration should be given to the connection of the equipment to the mains power and the effect that any

possible overloading of circuits might have on over current protection and supply wiring. Appropriate consideration of

equipment nameplate ratings of all connected equipment should be used when addressing this concern.

•

Reliable earthing of rack-mounted equipment should be maintained in addition to any grounding conductor provided

in the power cord. Particular attention should be given to supply connections other than direct connections to the

branch circuit (e.g. use of power strips).

3.6 General Environment

•

Be sure to maintain freedom of air movement around equipment to ensure safe operation.

•

Installation of the equipment in enclosed racks is not recommended due to possibility of restricted air flow.

•

Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the

equipment is not compromised.

•

The equipment is designed to operate to specification in an ambient temperature of +0°C to +40°C (+35°F to +104°F),

however, normal room temperature is recommended to ensure long term operation of the equipment.

•

If equipment is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment

in an environment compatible with the maximum ambient temperature (Tma) of +40°C (+104°F).

3.7 Gigabit Ethernet Ports

The input ports are auto MDI-MDIx and intended to be connected to a network distribution switch using straight through wired

Cat5e or better quality cable. The rear panel Management Interface port allows connection to a notebook or desktop PC for

managing and configuring the system. The port may be connected to directly, or in the case of a headend with many devices to

manage, may be connected to a management network (recommended) or the distribution switch containing the video stream

content. It is possible to set up virtual ports for a VLAN. Connections should be made with Cat5e or better network cables.

The GigE management port is auto MDI-MDIx and may be connected to a switch or router with a straight through wired cable.

Содержание IP2Agen2







































































Результаты поиска

Содержание IP2Agen2

Отзывы:

Похожие инструкции для IP2Agen2

Бренды по названию

Популярные бренды

ATX IP2Agen2, Руководство по установке и эксплуатации

Результаты поиска

Содержание IP2Agen2

Отзывы:

Похожие инструкции для IP2Agen2

Бренды по названию

Популярные бренды