28
Atwell International Limited
Under no circumstance should any unauthorised attempt be made to read or
alter the program within the safety controller.
The software contained is complex and has been meticulously inspected and
passed by the British Standards Institute for compliance to applicable safety
standards.
The software is under strict version control, it has been thoroughly tested, it has
inbuilt redundancy and in built self checking for errors, the timing and order of
the code is critical.
We strongly advise that under no circumstances should any unauthorised person
attempt to gain access or alter the program.
If any attempt is made it will be logged and your warranty and any responsibility
placed upon Atwell International will be immediately removed from ALL sites
under your control, there will be no exceptions.
We will also report this as deliberate tampering with safety devices to the
relevant approved bodies who certify your lifts.
If you need to alter parameters you must get written authority from Atwell
International who will log this given authority, once they are satisfied your
competence and reason for alteration.
Wherever possible we will issue a new program update in the form of a plug in
EPROM upgrade for you at a minimal charge. This will ensure the system is to
current standards and you maintain all warranties.
You must however inform Atwell if you plan to use or have used this upgrade at
other sites.
Very Important
