33
•
Image Appearance
This provides access to the advanced image settings for the network camera.
– Brightness:
The image brightness can be adjusted in the range 1-10, where a
higher value produces a brighter image.
– Contrast:
Adjust the
image’s contrast by raising or lowering the value in this field.
– Saturation:
Set an appropriate value in the range 1-10. Lower values mean less
color saturation.
– Hue:
Set an appropriate value in the range 1-10. The value distinguishes color,
such as red, yellow, green, or violet.
– Sharpness:
Set the amount of sharpening applied to the image. A sharper image
might increase image noise especially in low light conditions. A lower setting
reduces image noise, but the image would be less sharp.
– Enable flip horizontally:
Check this box to flip the image.
– Enable mirror image:
Check this box to mirror the image.
– Enable noise reduction:
Check this box to activate the noise reduction.
Once enabled, you can select noise reduction level.
– Enable defog:
Check this box to activate the defog function.
Once enabled, you can select defog strength.
•
Day & Night Control
User can setup Day & Night operation mode among Automatic, Day, and Night.
– Mode:
·
Automatic:
Normally displays color image, and switches automatically to
black & white image after the ambient light level reaches a pre-defined thresh-
old.
·
Day:
Always displays color image.
·
Night:
Always displays black & white image.
– Threshold:
Adjusts the level of light which the camera automatically switches
between color and black & white image.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button
to clear all of the information you entered without saving it.