41
▼
Boost
The Boost feature is used in conjunction with event detection. When this feature is turned ON, the
Framerate and Bitrate in the boost condition can be set to a different value than the ones in the
normal condition field. When an event is detected, the camera will boost the Framerate and Bitrate
from the normal condition to this boosted level for the duration of the event.
Check the box to enable the service.
• Boost
Setting
You can set the condition in Normal and Boost mode.
-
Boot Stream: Select a video stream for each condition in the drop-down list.
-
Framerate: Select a frame refresh rate per second for each condition in the drop-down list.
-
Bitrate control: Select VBR or CBR in the drop-down list in Normal Condition. You can’t
change it in Boost Condition.
-
Bitrate: Select a value for each condition in the drop-down list.
