mode.
The MAX/MIN/AVE values of all stored data can be displayed.
* Long press the "FUN" switch to return to the measurement mode.
* The data is displayed in absolute value.
upper right corner of the screen.
If "AV" is not displayed, short press the "DAT" switch again.
To complete the setting, long press the "FUN" switch until you hear a beep.
The "AV" display in the upper right corner of the screen disappears and the gauge becomes measurement
9-1.MAX/MIN/AVE values
9.Checking method on MAX/MIN/AVE values and function description
You can check the MAX/MIN/AVE values of all stored data.
■
Check MAX/MIN/AVE values
Short press the "DAT" switch in peak mode (PE) to check MAX/MIN/AVE values.
When the display shifts to the check screen for MAX/MIN/AVE values, "AV" will be displayed in the
MAX
:
maximum value
MIN
:
minimum value
AVE:average value
"DAT" switch
"DAT" switch
"DAT" switch