7-14 Reset to Initial Setting IV
(Initial Value
：
OFF
）
・
Reset all setting into Initial Value
※
Change ON/OFF by pressing "DAT" switch
※
Short press the "FUN" switch for confirm & Move to Printer Output Setting
※
All setting will be changed into initial value after completing the setting.
List of Initial Value
MARK
Initial Setting
ＴＲＡＣＫ
ＵＮ
N or kN
ＨＩ
0
ＬＯ
0
OV
120
ＵＤ
10
ＤＰ
ＯＦＦ
ＡＦ
ＯＮ
ＡＣ
ＯＦＦ
ＭＤ
ＯＮ
ＢＰ
ＯＮ
ＢＬ
ＯＦＦ
ＩＮ
ＯＦＦ
IV
ＯＦＦ
ＰＯ
ＯＦＦ
7-15.Set printer output
PO
(Initial Setting: OFF
）
・
Set whether to output to the printer or not.
When the printer output setting is ON, the display data can be outputted to the printer by pressing the "RES"
switch.
* Use Mitutoyo's Digimatic Mini Processor DP-1VA as the printer.
* You can switch ON / OFF repeatedly by pressing the "DAT" switch.
*When “TRACK” mode is chosen, it cannot be printed out even though Printer output setting is ON.
*When Printer Output Setting is ON & “PEAK” or “PP” mode is chosen, the letter “PO” is showed at the lower left
part of display.
(This letter “PO” is not shown when “TRACK” mode is chosen)
When you push Reset switch at this moment, the main unit will not be controlled while few seconds until the
display is reset because the main unit is in the mode for searching printer.
Please choose this setting “OFF” when you do not use printer.
* Short press the "FUN" switch to confirm the setting.
Returns to the first setting(7-1. Measurement mode).
FUNCTION NAME
Page to refer
Set measurement mode
7-1
Change measuring unit
7-2
Set comparator HI
7-3
Set comparator LO
7-4
Set overload
OV
7-5
Set screen update rate UD
7-6
Set flipping screen DP
7-7
Set auto power off AF
7-8
Set auto reset AC
7-9
Set printer output PO
7-15
or
Set the minimum digit display MD
7-10
Set buzzer BP
7-11
Set backlight BL
7-12
Set polarity IN
7-13
Reset to Initial Setting IV
7-14
The display changes every time
the "DAT" switch is pressed.
The display changes every time
the "DAT" switch is pressed.
