ATTO Technology MS01068, Руководство пользователя

Страница: 58 / 84

OPERATING ATTO 57
3. Close the two separation levers until they click (see
Figure 50). In case the separation levers require too
much force to operate, you should apply horizontal
pressure on the driving console handle towards the
center of the scooter. This will release the pressure
on the separation levers and will make them easier
to open.
NOTE: DO NOT try to open ATTO for driving before
the two levers are secured in the downwards
position
Figure 50
Freewheel
ATTO is equipped with a manual freewheel lever, which
when pushed to “N” state it in freewheel mode and
allows the scooter to be pushed.
When ATTO is in freewheel mode,
the braking system is disengaged, and ATTO will move
freely with very little force. This can cause injury and
property damage to anyone and anything nearby.

Change to freewheel mode only on a level surface.

Ensure ATTO's power is turned off.

Never sit on ATTO while handling the freewheel
lever.
After you have finished pushing your
scooter, always lock the brakes by changing to non-
freewheel mode.