OPERATING ATTO
ATTO is very easy to operate; it requires no special skills
and can be learned by following the steps described in
the following pages and by practice.
The first step is reading through this chapter of the
Owner's Manual and understanding the sequence of
steps required for opening and closing (folding) the
scooter. Once completed, use the manual to guide you
while you practice each step. It may be difficult at first
but will be very easy once you have practice it several
times.
To help you learn we have created a simple video you
can watch under the videos section of our website:
www.movinglife.com/videos
Injury hazard due to improper
assembly, disassembly, opening or closing ATTO.
Ensure that all components in the scooter have
been correctly placed before continuing to the next
step. Always check that all locked devices are
holding correctly.
Opening
1.
Make sure your ATTO is on flat ground before
opening. Make sure you have clearance of 2 meters
(7 feet) from the side of the back wheels.
Operations described
below are done near and around pinching points. Be
careful and follow instructions to prevent injury.
Make sure your fingers are away from moving parts
that may be closing gaps while moving.
2.
Release the adjustment lever of the handle bar and
bring the handle bar to an upright position, then
bring the lever back to its secured position (see
Figure 4).
Содержание MS01068
