ATTO Technology iPBridge 1550D Скачать руководство пользователя страница 43

xiv

Appendix C  Safety standards and compliances

The equipment described in this manual generates and uses radio frequency energy. If this equipment 
is not used in strict accordance with the manufacturer's instruction, it can and may cause interference 
with radio and television reception. See the Technical Specification sheet for a full list of certifications.

WARNING

Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used 
batteries in accordance with your local environmental regulations. 

No operator serviceable components inside the iPBridge 1550D. 

Do not remove cover of the iPBridge 1550D. Refer servicing to qualified personnel.

FCC Standards: Radio and Television Interference

This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction manual, 
may cause interference to radio communications. It has been tested and 

found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC 
rules, which are designed to provide a reasonable protection against such interference when operating 
in a commercial environment. Operation of this equipment in a residential area is likely to cause 
interference, in which case the user, at his own expense, will be required to take whatever measures may 
be required to correct the interference.
If this equipment does cause interference to radio and television reception, which can be determined by 
turning the equipment off and on, try to correct the interference by one or more of the following 
measures

•  Move the receiving antenna.
•  Relocate the bridge with respect to the receiver, 

or move the bridge away from the receiver.

•  Plug the computer into a different outlet so the 

computer and receiver are on different branch 
circuits.

•  If necessary, consult an ATTO authorized 

dealer, ATTO Technical Support Staff, or an 
experienced radio/television technician for 
additional suggestions.

The booklet 

How to Identify and Resolve Radio/TV Interference Problems

 prepared by the Federal Com-

munications Commission is a helpful guide. It is available from the US Government printing office, Wash-
ington, DC 20402, Stock No. 004-000-00345-4.

Canadian Standards

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du 
Canada.

European Standards: Declaration of Conformity

This following statement applies to the ATTO iPBridge. 
This device has been tested in the basic operating configuration and found to be compliant 
with the following European Union standards

Application of Council Directive: 89/336/EEC

Содержание iPBridge 1550D














































Отзывы: