Service Manual
USB Device Test
Purpose: Test if the USB Device interface works normally through EasyScope for ADS1000
series oscilloscope.
Tools
：
●
An Unit ADS1000 digital oscilloscope
●
A computer with USB interface
●
A standard USB cable(Type AB)
●
EasyScope software for ADS1000 series
Steps
：
1
．
Install the EasyScope to computer.
2
．
Connect the oscilloscope with PC using an USB cable and install the driver program step by
step following the instruction.
Picture 3-3 connecting the USB Device interface
3
．
Run EasyScope ,then click “Connect”, if successful, the two point lamps at the top right
corner of the software will be changed from red to green.; if failed, a prompt message will be
appeared as below.
Picture 3-4 USB Device connect failed
