Service Manual
General Inspecting
After receiving a new ADS1000 series oscilloscope, please inspect the instrument as follows:
1
．
．
．
．
Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents of the shipment
have been checked for completeness and the instrument has been checked mechanically and
electrically.
2
．
．
．
．
Inspect the whole instrument.
In case there is any mechanical damage or defect, or the instrument does not operate properly
or fails performance tests, notify the ATTEN Sales Representative.
If the shipping container is damaged, or the cushioning materials show signs of stress, notify
the carrier as well as the ATTEN Sales Department. Keep the shipping materials for
carrier’s inspection.
3
．
．
．
．
Check the accessories.
Accessories supplied with the instrument are listed below. If the contents are incomplete or
damaged, notify the ATTEN Sales Representative.
Standard Accessories:
● Two pieces 1:1,(10:1) Passive Probes
● An User Manual
● A Certification
● A Guaranty Card
● An CD(including EasyScope3.0 computer software system)
●
A Power Cord that fits the standard of destination country
●
An USB Cable
