ATT Turbo Hotspot 2, Руководство пользователя, Страница: 6 / 21

6
Turbo Hotspot 2 User Guide
Setting Up Your Mobile Hotspot
The mobile hotspot includes a SIM card in the box.
Insert SIM card
1. Remove the back cover and take the battery out.
2. Remove the SIM card from the outer card.
3. Locate the SIM card slot. Hold SIM so that the
cut corner is at the top and gold contacts are
facing downward. Insert SIM by pressing down
on the clip and sliding into the SIM slot.
Warning: To avoid any damage to your device,
only use the standard Nano-SIM card provided.
Re-insert the battery
1. Align the battery contacts with the terminals
in the battery compartment. Push the battery
down until it clicks into place.
2. Line up the groove at the back of the device
with the battery cover (the arrow will be
pointing down).
3. Replace the battery cover over the battery
compartment and press down on the four
corners of the battery cover until it clicks
into place.
Charge mobile hotspot fully
Your device includes a charger. To charge, plug one
end of the charger into an electrical outlet and the
other end into the device’s USB-C port.
Turn the device on
Press and hold the Power/Navigation button for
3 seconds to turn on.
If needed, here is how to remove the SIM card:
1. Remove back cover and take the battery out.
2. Locate the SIM card slot.
3. Push down on the plastic clip in front of the SIM
card while sliding the SIM card out of its slot.
Battery
SIM Slot
SIM Card
SIM Slot
Clip
Battery
Contacts
Back Cover