ATT Turbo Hotspot 2, Руководство пользователя, Страница: 14 / 21

14
Turbo Hotspot 2 User Guide
Block unwanted websites
Block your device from connecting to unwanted websites while connected to your
mobile hotspot.
1. Select Security > Website Filter.
2. Select blacklist or whitelist mode.
3. Click Add New Rule then input the website’s URL to add a new whitelist or blacklist rule.
4. Click Save.
Online WebUI Manager: Configuring Network Settings
LAN Settings
1. Manual LAN settings (IP, DHCP, etc.) can be configured through the Online
WebUI Manager.
2. Select Settings > LAN Settings.
3. Configure settings by filling out the following fields: IPv4 Address, IPv4 Subnet Mask,
DHCP Address Pool Start, DHCP Address Pool End, DHCP Lease Time.
4. Click Save.
Enable/Disable Cellular Data
Turn off Cellular Data to block all internet traffic on the mobile hotspot.
1. Select Settings > Mobile Settings.
2. Click the toggle switch under Cellular Data to switch on or off.
3. Click Save.
Access Point Name (APN) Settings
Your mobile hotspot comes pre-configured with the access point name (APN) for your
network service provider. The mobile hotspot checks the APN to determine the type
of network connection to establish.
Add an APN for another network
1. Select Settings > Mobile Settings.
2. Click Add New Rule.
3. Fill out the following fields:
a. For Profile Name, enter the Profile Name of APN.
b. For APN, enter the APN provided by carrier.
c. For Username and Password, enter the Username and Password provided by the
carrier (if they are required for the network).
d. For Authentication, select the authentication mode: PAP/CHAP (recommended
default); PAP; CHAP.
e. For IPType, select the type: IPv4v6 (recommended default); IPv4.
4. When completed, click Save.