![ATSG 722.6 Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/atsg/722-6/722-6_service-manual_3005280024.webp)
P
R
N
D
4
S
W
3
2
1
P
R
N
D
-
+
S
W
STANDARD SHIFT LEVER ASSEMBLY
DRIVER SHIFT CONTROL SHIFT LEVER ASSEMBLY
- Park position enables the engine to be started
while preventing the vehicle from moving. For safety
reasons, the vehicle's parking brake should always be
used in addition to the "Park" position.
- Reverse enables the vehicle to be operated in a
rearward direction.
- Neutral position enables the engine to start and
operate without driving the vehicle. If necessary, this
position should be selected to restart the engine while
the vehicle is moving.
The transmission Shift Lever Assemblies vary by
model. There may be four to eight different positions
shown on the shift quadrants, as shown in Figure 24
and Figure 25. All are equipped with a W/S Mode
Selector Switch and a Transmission Range
Recognition Switch (TRRS).
- Drive range should be used for all normal
driving conditions for maximum efficiency and fuel
economy. Drive range allows the transmission to
operate in each of the five forward gear ratios.
Downshifts to a lower gear are available for safe
passing, by depressing the accelerator, or by manually
selecting a lower gear with the shift lever.
In this position the Driver has the option to push the
lever to the left or to the right. To the right would
allow a shift sequence up to 5th gear while pushed to
the left side would inhibit 5th gear.
SHIFT LEVER ASSEMBLY
Figure 24
Figure 25
W/S Mode Selector Switch Operation
Vehicle Towing
"S"
This is a Standard driving program which will
provide a first gear start when in the 4<>D or the -D+
selector position. When the Reverse position is
selected, a 3.16:1 ratio is available.
"W"
This is a Winter driving program which will
provide a second gear start when in the 4<>D or the -
D+ selector position. When the Reverse position is
selected, a 1.93:1 ratio is available. The Winter mode
is to increase the probability of removing the vehicle
from a stuck condition.
If the vehicle must be flat towed, it should be done
with only the "N" position selected, for a maximum
towing range of 32 miles (50 km), at a maximum
speed of 32 mph (50 km/h).
Standard Shift Lever Assembly
P
R
N
4<>D
Continued on Page 25
W/S Mode
Selector
Switch
W/S Mode
Selector
Switch
24
Copyright © 2009 ATSG
Copyright © 2009 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
WWW.ALL-TRANS.BY