ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 130 / 214

4-14 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Test, Setup, Diagnostics (TSD) Menu Chapter 4: Color Terminals
Download from USB – The Download from USB command (“F4” key) enables you to
install downloads (applications) to the Maximus terminal from a USB flash drive. With a USB
flash drive that contains download files (*.dld) installed in the Maximus USB port, press the
“F4” key to access the download selection screen as shown in
Figure 4-13 on page 4-14 . Use
the “F7” and “F8” keys to scroll between multiple download files (if applicable). With the
desired download file highlighted, press the
enter key to install the download file/application
on the Maximus terminal.
For more information about the USB see Appendix C, "Using the USB" . For more information
about the UCS applications (downloads and *.dld files) see the Universal Command Set
Manual, MANU-UCS-01.
Figure 4-13 Selecting a Download File
• Restore Factory Settings - This function is reserved for specific applications. In
typical Maximus configurations pressing the “F5” key to select Restore Factory
Settings command results in the “ Unable to Restore Settings” response.
• Exit – Press the “F8” key to go to the Reboot Confirmation Window as shown
in Figure 4-11 on page 4-12 . If you select Return To Setup (“F8” key) on the
Reboot Confirmation Window you will proceed to Setup Mode (see "Setup
Mode" on page 4-15 for more information). If you select OK Re-start (“F4”
key) the system reboots.
Ensure the desired download file is present on the USB flash drive before entering
the download selection screen. Once you enter the list the terminal will install a
download if one is present. You won’t be able to exit without installing a download
if one is on the flash drive (both the clear and enter keys install the highlighted
download file). If you are forced to install an undesired download file, you can
remove it using the
Reset Download command as described on "Reset Download &
FP Device" on page 4-11 .
NOTE:
MAX_BIO_001.dld
MAX_NOBIO_002.dld
MAX_NOBIO_003.dld
MAX_NOBIO_004.dld