ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 128 / 214

4-12 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Initial Setup Chapter 4: Color Terminals
• Confirm Reset Download - Press the “F2” key to reboot the Maximus terminal
and clear the terminal memory, including all prompts and data in any queues.
After you reset the download, you need to download parameters to the
terminal to make it functional.
• Exit - Press the “F8” key to exit the he Delete Finger Print Templates and
Reset Download confirmation screen and return to the Initial Setup menu
screen (as shown in Figure 4-3 on page 4-5 ).
Test Setup Diagnostics
Press the “F7” key to exit the Initial Setup menu and go to the TSD mode screen (Test, Setup,
Diagnostics) as shown in
Figure 4-12 on page 4-13 . This screen also enables you to access the
Information Mode, the Download from USB command, and the Restore Factory Settings
command. For more information, see "Test, Setup, Diagnostics (TSD) Menu" on page 4-13 .
Exit
Press the “F8” key to access the re-boot confirmation window as shown in Figure 4-11 . The
options on the screen are:
• Press the “F4” key to select OK re-start and re-boot the Maximus terminal
(saving any changes).
• Press the “F8” key to select Return to Setup . Selecting this option places the
terminal in setup mode (described in "Setup Mode" on page 4-15 ).
Figure 4-11 Reboot Confirmation Window
03:38:15
Friday
Nov 7, 2014
OK
re-start
Return
To
Setup
You have asked for a
re-boot or have
changes that require
re-boot