ATS Maximus MCJ2000 Series, Справочное руководство, Страница: 127 / 214

Chapter 4: Color Terminals Initial Setup
MANU-MAXIMUS-02 Maximus Reference Manual 4-11
Revision-02
• DateFormat For Setup – Press the “F3” key to cycle through MMDDYY ,
DDMMYY , or YYMMDD for the date format. The selected format displays in
real time on the option field.
• Return To Setup – Press the “F4” key to exit the Set Date & Time and Initial
Setup menus and go directly to Setup Mode . See "Setup Mode" on page 4-15
for more information.
• Exit Setup – Press the “F8” key to exit the Set Date & Time and Initial Setup
menus and display the reboot confirmation window as shown in "Reboot
Confirmation Window" on page 4-8 . The reboot confirmation window provides
two options:
• Press the “F4” key to select OK Re-start . Selecting this option reboots the
terminal and applies any changes you have made.
• Press the “F8” key to select Return to Setup . Selecting this option places
the terminal in setup mode (described in "Setup Mode" on page 4-15 ).
Reset Download & FP Device
Press the “F6” key to access the Reset Download & FP Device confirmation screen as shown
in Figure 4-10 .
Figure 4-10 Delete Finger Print Templates and Reset Download Confirmation Screen
The options are:
• Confirm FPERASE - Press the “F1” key to reboot the Maximus terminal and
erase all fingerscan templates. If the Maximus is not equipped with a biometric
finger scan device or it is not configured in the
Setup Menu (see "Device
Setup" on page 4-16 ), the Confirm FPERASE option is disabled and the label
reads No FP Device .
09:39 AM
Thursday
Nov 13, 2014
Confirm
FPERASE
Confirm
Reset
Download
Exit
Templates and Reset
Download
Delete Finger Print