ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 124 / 214

4-8 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Initial Setup Chapter 4: Color Terminals
Figure 4-6 Reboot Confirmation Window
The Reboot Confirmation window provides two options:
• Press the “F4” key to select OK Re-start . Selecting this option reboots the
terminal and applies any changes you have made.
• Press the “F8” key to select Return to Setup . Selecting this option places the
terminal in setup mode (described in "Setup Mode" on page 4-15 ).
03:38:15
Friday
Nov 7, 2014
OK
re-start
Return
To
Setup
You have asked for a
re-boot or have
changes that require
re-boot
To return to the Initial Setup Menu, simultaneously press and hold down the clear and enter
keys for about five seconds (and enter the password if prompted for it).
NOTE:
There is a reset switch that you can push to reboot a terminal, as well. Use this switch if you
cannot access the Re-Boot option in the terminal’s menu. This switch is called out in
Figure 2-10 on page 2-11 .
NOTE: