Step 16:
Listen for a series of rapid beeps every 20 seconds. This
indicates to snap the throttle
twice
to limit the chemical
puddling in the intake manifold.
WARNING: This step must
be carried out. Never leave the vehicle while cleaning. Never
use a throttle stick on the vehicle during induction cleaning.
If any problem arises push the emergency shut off.
Step 18:
Run the induction cleaning until the steady state audio
alarm goes off, indicating that the cleaning process is
completed. Push the Emergency Shut Off Switch to shut
the power off to the 3C.
Step 17:
Know your 3C.
If the 3C encounters an unforeseen problem during the
cleaning process:
• There are manual chemical shut off valves on the top of the
reservoir bottle base.
• There is an emergency stop switch on the front panel.
• To drop the system pressure disconnect the compressed air
hose and bleed the air pressure using the air bleed on the
back of the 3C machine.
IF THE 3C MACHINE APPLIED CHEMICAL WITHOUT THE ENGINE RUNNING:
DO NOT CRANK THE ENGINE OVER. FIRST, REMOVE ALL SPARK PLUGS, THEN MAKE SURE TO
DISABLE SPARK. NOW CRANK OVER THE ENGINE UNTIL ALL CHEMICAL IS OUT OF THE ENGINE.
In the unlikely event this occurs please let ATS know.
