Atrium 10.236.3, Руководство по эксплуатации

Страница: 17 / 36

17
GB
Mute / Sensor I.D. / Pre-setting •
1. This button is designed to switch to mute mode. While tire pressure is getting abnormal,
the abnormal status will show up on LCD monitor with beep. Press this mute button to
stop the beep.
2. This button will also enter the sensor I.D. learning feature.
3. Press mute button for a few seconds, then the monitor will enter into the pre-setting
mode.
Temperature / •
+
1. This is for tire temperature display. When this button is pressed, the LCD monitor will show
all tires‘ temperature figures after 3 seconds, it will keep showing tires‘ pressure figures.
2. Press this button to choose the temperature as Centigrade or Fahrenheit in mode
function.
3. Press temperature button to increase values in mode function.
Backlight /
•
–
1. This is turning on backlight will be lighting for 3 seconds and turn off automatically.
2. Press this button to choose pressure unit as PSI, KPA, BAR, KG/CM² in mode function.
3. Press backlight button to decrease values in mode function.
Pre-setting
Mode 1: Setting pressure units • Shows: SET UNI
1. Press button mute into the next mode.
2. Press button backlight to switch pressure units.
Mode 2: Setting temperature units • Shows: SET UNI
1. Press button mute into the next mode.
2. Press button temperature to switch temperature units.
Mode 3: Setting low pressure • Shows: SET LO.P 26.0 PSI
1. Press button mute into the next mode.
2. Press button temperature to increase the setting figure.
+
3. Press button backlight to decrease the setting figure.
–
Mode 4: Setting high pressure • Shows: SET HI.P 45.0 PSI
1. Press button mute enter into the next mode.
2. Press button temperature to increase the setting figure.
+
3. Press button backlight to decrease the setting figure.
–
Mode 5: Setting the high temperature • Shows: SET HI.T 70.0 °C
1. Close the setting mode.
2. Press button temperature to increase the setting figure.
+
3. Press button backlight to decrease the setting figure.
–