Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
14
of
49
Figure 2.7 System Setting Management Pop-up Window
2.2.2
Connection feature
The
Connection
feature displays the current setting of the network configuration of the manage switch which are the
status of
DHCP Client
, the
IP Address
, and the sub-
Netmask
as shown in Figure 2.8. To change network
configuration, the user can click on the gear icon to bring up the IP Network Setting pop-up window as shown in
Figure 2.9. The user can choose to enable or disable the Dynamic Host Configuration Protocol (DHCP) on the device
as the DHCP client by selecting the corresponding drop-down list. If the DHCP Client is enabled, the manage switch
will obtain the IP address configuration from another server in the network. If the DHCP Client is disabled, the user
will have to enter the
IPv4 Address
,
Subnet Mask
,
Gateway IP
,
DNS Servers 1
and
DNS Servers 2
. After you finished,
clicking on the
Save Changes
button to save any changes or clicking on the
Save Changes and Apply
button to save
and apply the setting. Table 2.2 summarizes the device information setting descriptions and corresponding default
factory settings.
Figure 2.8 Connection Feature
.
Figure 2.9 IP Network Setting Pop-up Window
