Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
13
of
49
Figure 2.6 Information Feature
Table 2.1 Descriptions of the information features
Label
Description
Factory Default
System Name
Specifies a particular role or application of different switches. The
name entered here will also be shown in Atop
’
s Device Management
Utility. Max. 63 Char.
(Model name)
System
Description
Detailed description of the unit. Max. 63 Characters.
Managed
(Model name)
System Location
Location of the switch. Max. 63 Characters.
Switch Location
System Contact
Provides contact information for maintenance. Enter the name of
whom to contact in case a problem occurs. Max. 63 Characters.
System OID
System’s SNMP ob
ject identification (OID) number
-
Model name
The
device’s complete model name
(Model name)
Loader Version
The bootloader version of the device
-
Kernel Version
The current kernel version of the device
-
Firmware Version The current firmware version of the device
-
Uptime
The duration of time since the device was started in days, hours, and
minutes
-
Current Date &
Time
The current date and time of the device
-
To change or configure fields under the Information feature, the user can click on the gear icon to bring up a pop-up
window called System Setting as shown in Figure 2.7. On this window, the user can configure
System Name
,
System
Description
,
System Location
and
System Contact
. After you finished, clicking on the
Save Changes
button to save
any changes or clicking on the
Save Changes and Apply
button to save and apply the setting.
Remark: The management pages provide two ways to save the changes of the configuration:
Save Changes
and
Save Changes and Apply
buttons. The former button will only save the new setting whole the latter button will save
and then apply the setting so that it will be in effect immediately.
