AW5300 Wireless Access Point
Chapter 4 Web Console Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
4-7
WLAN Interface
In Regular AP mode, the device may function as a router to provide a private network on the WLAN
interface to mobile stations. When “Router Mode” is enabled, you need to set the Router IP address and
Subnet Mask.
Figure 4-7 The Network Settings for LAN & WLAN Interface
4.3.2. WDS Interface
In WDS Hybrid operation mode, the device will be act as a router to be part of the WDS networks.
Enable “Router Mode” to setup a WDS network as shown in Figure 4-8. Next is to fill in the IP Address,
Subnet Mask, and Gateway of the other WDS networks, or if your network has DHCP server, you can
enable DHCP function to obtain an IP Address automatically. The WDS network can connect up to 4
routers. At least one of the routers is needed to be set as Default Gateway.
Figure 4-8 The WDS Interface settings of Network Settings
