AW5300 Wireless Access Point
Chapter 3 Basic Configuration
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
3-11
3.5.3. Wireless Bridge Mode Configuration
The configuration flow of the Wireless Bridge Mode is shown below.
Figure 3-18 Wireless Bridge Mode Configuration: Step 1
Figure 3-19 Wireless Bridge Mode Configuration: Step 2
Step 1
: On
“Overview”
page,
choose
“Wireless
Bridge”, and
click “Save
Settings”.
Step 2
: On
“Basic
Settings”
page,
uncheck the
“Automatic
Channel
Select” and
choose a
specific
channel.
This should
be similar to
that of the
peer WDS.
Click “Save
Settings”.
Step 3
: On
“Security
Settings”
page, setup
the security
as you
desire, and
click “Save
Settings”.
Step 4
: On
“WDS
Settings”
page, enter
the WDS
peer MAC
address and
click “Save
Settings”.
Step 5
: On
“Local Area
Networks”
page, enter
the “IP
Address”,
“Subnet
Mask” and
“Default
Gateway”.
Step 6
: Click
“Apply” to
save the
settings and
to activate
the current
configuration
s.
