12
The room intended to house the storage system must comply with the relative ambient temperature and relative
humidity specifications provided in the technical appendix.
No auxiliary or additional forms of ventilation are required for the room as there is no emission of gas or other
substances.
3.2.1
Handling of the system
The machine RA.Store-K-F can be handled mechanically with a pallet jack, and in this case it is not necessary to
disassemble its parts in order to reduce its weight.
If the handling needs some manual operations, disassemble some parts in order to reduce the weight of each single
component.
The operations for the manual handling are:
-
Removal of the external plastic parts
-
Removal of the batteries
-
Application of auxiliary handles on the basic structure
-
Transport of the basic structure, batteries and plastic parts separated
-
Disassembly of the auxiliary handles and reassembly of the batteries
-
Reassembly of the plastic parts
Before executing the manual handling operations, please read the
Appendix D - Weights for the transport
3.2.2
Preliminary stages
Be sure that all the protections on the electrical panel of the storage system are OFF, as shown in the following image.
Picture 1
–
Starting position of the protections of the RA.Store-K-F electrical panel
Insulate the cables that come down from the PV panels strings.
QB1 QPV1 SPV1 QPV2 SPV2 QG1 QE2
COMPONENT
NAME
ELECTRICAL
SCHEME
COMPONENT
NAME
EXTERNAL
LABEL
COMPONENT
STATUS
OFF OFF
OFF OFF OFF
BATTERY
GDS1 SPV1 GDS2 SPV2 GRID
EPS
