20
Basic
Functions
Locking the
Keypad
Handset
This function is useful to avoid unwanted function activations by accidentally
pressing any keys when you are carrying your handset. If you activate the
key lock, the keys are inhibited, except for the
key.
In this condition, when a call comes in, you can answer the call by pressing
the
key. When the call ends, the keys will be locked again.
, in the Standby mode just keep the
key pressed till the
display shows the key lock icon
.
, keep the
key pressed again till the key lock icon
disappears from the display.
ACCEPT
ACCEPT
To lock the keys
To unlock the keys
Paging
You can page the handset from the base unit making it ringing with a
special ring. It's useful to locate a lost handset or call the user who currently
has the handset.
, briefly press the
key
located on the
base. All the phones registered with the base ring for 15 seconds.
, press the
again or any keys on the handset.
To send the paging signal
To stop the paging signal before 15 seconds are passed
Paging
Paging
If a call comes in while the handset is being paged, the handset stops the paging
operation and starts ringing normally in order to allow you to answer the call.
Note
Out of Range Indication
The bars at the right of the
icon continuously show the signal strength
received from the base. If you are too far from the base, the radio signal
might become too weak and the phone might not access the telephone line.
In these conditions you can't make or receive phone calls, for this reason,
the
icon turns to red.
0
0
