15
Getting
Started
A handset can be registered to up to 4 different base units in order to extend the radio
coverage. A base can be used with up to 5 handsets in total. Obviously the base can
be accessed by one handset a time (because a base is connected to one line).
Note
5
6
Press
key to confirm, the display shows a serious of digits
(register code). Press
key again, then the display asks you
to enter the
PIN code (preset to
) which acts as phone's
authentication code (AC). Enter this code and press the
key.
SELECT
SELECT
1590
SELECT
base
Press the
or
key to choose the base number you want.
Press the
key in order to search the base. The display
shows "
".
Up
Down
SELECT
Searching:
7
If the registration has performed successfully, the new handset will
show the phone and base numbers (e.g.
) and returns
to Standby mode.
HS(2) BS(1)
Deactivating a Handset
If necessary, you can clear the registration of a registered handset in order
to stop its access to one or more base units, but you can not deactivate the
handset you are using. Just deactivate it from another handset (of the same
type) which have registered to the same base. If only one handset or
different types of handsets are registered, it is not possible to deactivate the
handset. Please follow these steps:
1
Press
key to display the main menu items.
MENU
2
3
Press the
or
key to choose
, then press
the
key. Press the numeric key related to the handset
number you want to clear the registration, then press the
key. The display of the handset which you have cleared the
registration shows
and it cannot be used anymore with
the base.
Up
Down
Release Handset
SELECT
SELECT
NOT SUB
Press the navigation keys
repeatedly to choose
, then
press the
key. Enter the current base PIN (preset to
)
and press the
key.
SELECT
1590
SELECT
Base Setting
