Atomos ZATO CONNECT, Руководство пользователя

Страница: 37 / 43

(default), MM-DD-YYYY, and YYYY-MM-DD.
Time Preview shows you the current time you've entered. You can make adjustments by
modifying the Hour and Minute fields.
Date Preview highlights the current date that the ZATO is set to. You can adjust the Date by
modifying the Day, Month, and Year fields.
Note:
Once you've dialed in your Date & Time, the ZATO will keep it, even if you power o ff
the device. The only ways the Date & Time might stop counting is if you reset your ZATO
CONNECT, or if the internal battery runs out.
About Device:
The last sub-menu in the General tab highlights the Version number of the firmware that's
currently installed on the ZATO CONNECT, the AID, and the firmware Build Info.
You'll also find the Reset Device button here, which resets the ZATO to its factory state.
Pressing it and confirming the warning dialog removes everything previously configured on
the ZATO CONNECT. This means that all WiFi & Ethernet Network configurations, Overlay
Graphics and Presets, Atomos Cloud pairings, and so on will be gone.
Important Note: Before you perform a reset, you will need to unpair your ZATO CONNECT
from your Atomos Cloud Studio account (if you've previously paired it). To do this, log into
your account via
atomos.cloud , and click on the three dots in the top right corner of your
device's entry. A dropdown menu will open, allowing you to unpair your device. Once you
press unpair device, you will need to confirm your selection once more in another popup
menu.